Egyptian Art Statue From Metropolitn Museum Essays - Hairdressing

Egyptian Art Statue from Metropolitn Museum Egyptian Art Statue from Metropolitn Museum This superb pair standing statue remains semi-attached to the limestone block from which they were carved. There is chipping on the surface of Memi's (man) right arm. A portion of Sabu's (woman) nose and her lips appear to be chipped off as well. On the lower part of Sabu's body there is chipping on both legs and right underneath her pelvic area. There are visible horizontal lines that cut right across Memi's right forearm and underneath Sabu's breasts. These lines may indicate what pieces of the statue had to be mended back together. There is also chipping on the bottom right hand corner of the stone slab underneath Memi's right leg. There are remnants of black paint on Sabu's wig, hairline and on her pupils. On Memi's left shoulder there is a small remnant of rust color paint that was probably the skin color used for his whole body. Black paint is also visible on the lower portion of Memi's hair, especially along the tips closest to his shoulders. All other paint on the statue seems to have deteriorated over the years. The hieroglyphs along the bottom of the stone slab label this work of historical art with representations of birds and plants. The representation of nature in Egyptian artwork is very common during the Old Kingdom time period. The overall statue remains fairly intact suffering from only one major handicap, which is the loss of its original color. This pair statue subtly deviates from the conventional representations of husband and wife in Old Kingdom artwork. This statue is rather exceptional because we see an image where the wife's symbolic gesture that signifies their marital status is affectionately returned by her husband's embrace. There is a sense of intimacy and warmth in this embrace. This may explain the fact that Memi stands with his feet together as opposed to the masculine striding pose where the left leg is slightly advanced. Memi retains the strict canonical pose with respect to the rigid frontal well-built body. His right arm hangs straight down and close to his side while his right hand is clenched in a fist with the thumb facing forward. He appears to be clenching some type of cylinder rod, which can also be interpreted as a symbol of royalty or power. His chest muscles, abdominal muscles and right bicep emphasize his well-toned body. His left arm wraps around the back of Sabu's head and drapes down over her left shoulder. His left hand rests on her left breast. His fingers are stiff and elongated. Knuckles are visible and his left thumb is seen in profile. Memi stands much larger than Sabu and is almost a full head taller than she is. Their bodies are not aligned together; Memi is slightly more advanced and protrudes a bit more from the stone slab than Sabu. His back is not fully attached to the slab although his legs and feet appear to be semi-attached. Memi's face is round in shape and is his gaze is focused straight ahead. His jaw line is not clearly defined. The texture of his hair appears to be very thick and in layers. This possibly could be interpreted for wavy or even curly hair. His hair partially covers his forehead and fully covers his ears almost touching his shoulders. His neck is very tiny and otherwise not proportioned to the rest of his body. His eyes are oval shaped and his nose is round and wide. He has full lips and his chin is well defined. Memi wears a garment wrapped around his waist, which covers the lower portion of his body to his knees. He is also wearing some type of belt that fastens underneath his navel and imitates a fan-pleated pattern, which covers the right side of his garment. His knees and shinbones are highly defined. His ankles are much narrower than the lower portion of his leg and his toes resemble the appearance of his fingers. Sabu's pose is canonical with her left arm hanging straight down and close to her body. Her left hand rests on her left thigh with the thumb facing forward. Her right arm circles around her husband's waist. A portion of her right arm and shoulder are visible showing the extension of her arm around his body. Her right hand fingers are very stiff and close together. Her right thumb is carved in profile. Sabu is significantly smaller than Mimi and stands closer to the stone slab. Her back is slightly separated from the

Top 15 upcoming jobs to look out for this fall

Top 15 upcoming jobs to look out for this fall The summer is almost over, and it’s time to start thinking about packing away the swimsuit and pulling the business-wear back out of the closet. If you don’t already have a job lined up for this coming fall- or are thinking that it might be time for a career change- you don’t have to worry that nothing’s out there. Quite a few industries are thriving, and looking to hire this fall. Here are 15 of them. 1. HealthcarePeople are always going to get sick or injured- that’s just a fact of life. The upside of this unfortunate reality is that the healthcare industry will always need people to help treat the constant inflow of patients. Registered nurses are currently needed more than any other healthcare professionals, but there are also plenty of openings for licensed vocational and practical nurses, as well as physical therapists. For those who have nursing degrees, the job market is pretty rich at the moment.2. SalesYou don’t need a degree to go into sales, just a strong drive to serve customers and the ability to make whatever you’re selling desirable. If you have a knack for convincing consumers that they simply cannot live without Apple’s latest iPhone, you’re in luck, because telecommunication sales is particularly hot right now. The best positions offer both an hourly wage and commissions.3. ManagementSalespeople and other business associates need some guidance to do their jobs. That’s where management comes in. Of course, management is not only needed in the retail sector. Medical managers, health services managers, and marketing managers are also very much in demand at the moment.4. Office and administrative support workIt’s a good time to be in administration. New positions for office and administrative support workers are opening at a break-neck pace, especially in big cities such as New York, Chicago, and Los Angeles. Customer service representatives, executive secretaries, offic e-worker supervisors, and executive administrative assistants are in high demand to keep business rolling smoothly. Monster.com recently added more than 388,000 listings for admin professionals, so it’s a great time to be one.5. AccountingAccounting may not be the most exciting profession in the world, but these cagy number crunchers are needed in a number of industries this fall. One reason for the high number of accounting positions is the abundance of new companies that started up in the wake of the economic collapse a decade ago. Those relatively new companies are still on the lookout for help in their accounting departments, and brand new companies are kicking into gear all the time, which means that accounting jobs should be abundant for some time.6. Personal financial servicesAlthough we’re a decade removed from the financial collapse, the economy is still working its way onto its feet and people are still very much in need of advice regarding the most sensible way to handle their money in the current climate. Financial planners help people at all economic levels to manage their money. They help the rich stay rich and the less fortunate to keep their heads above water, and they are very necessary these days.7. ConsultingThe rise in new businesses has also increased the demand for consultants. They’re the people who offer sage advice for running businesses as efficiently as possible. They offer suggestions on making the most of personnel, managing clients effectively, and other key moves.8. Call centersAnother industry on the rise is the call center business. More and more, customer service is being handled over the phone. Call center workers both help customers with problems and handle sales. Initially, this kind of work tended to get outsourced, but public outcry has resulted in call centers opening up in the United States. Those with traditional sales and customer service experience may decide to put their skills to use at one of these new domestic call centers. The jobs are definitely out there.9. TransportationThe popularity of online sales is one reason that call center work is thriving these days. The online retail industry has also created a high demand for the delivery people who transport the products purchased through Amazon, Fresh Direct, and other online companies. That means truckers and other drivers should have a fairly easy time getting work these days. Those who are interested in transporting people instead of goods may find work for companies such as Lyft and Uber.10. Computer supportThe twenty-first century’s decisive move to an online environment means that all manner of computer-related industries continue to enjoy boon times. Like call center work, computer support work used to be outsourced to high degree, but this is also changing. IT is coming home again.11. SoftwareOur reliance on the Internet also means that the demand for new software developments is constant without any sign of decline in the near future. With new computing systems, devices, apps, and gadgets popping up on a seemingly daily basis, those who can develop new software for such technologies are vital.12. Food preparation and serviceWhile industries such as transportation, accounting, and personal financial services are on the rise because of specific contemporary factors, the strength of the food industry is pretty constant. However, certain areas of the industry are certainly in a growth phase this fall, such as supervisors and servers. The fast food industry may be less mighty than it once was, but food preparers and servers are still very much needed at McDonald’s, Dunkin Donuts, and Wendy’s. Cooks are needed too.13. Repair and maintenanceHere’s another old-fashioned industry that also continues to deliver the jobs. Those who are great with their hands and have a knack for installing appliances and performing automotive maintenance or general repairs will find a ver y welcoming job market. Supervisors for mechanics, installers, and repair people are also necessary in today’s market.14. EngineeringOne of the greatest crises facing the United States at the moment is its crumbling infrastructure. Roads, bridges, dams, and airports are in dire condition, creating safety hazards that could turn tragic without serious work. Civil engineers are responsible for redesigning our infrastructure, and the demand for them is definitely on the rise. However, engineers do not just rebuild the physical structures on which we drive. Biomedical engineers work on our bodies, and the rising healthcare industry has opened a great need for them as well.15. ConstructionEngineers are not alone in reviving our infrastructure. Once they have redesigned our roads and buildings, construction workers are then needed to do the physical labor. The explosion in real estate that has seen new apartment buildings and condominiums spring up all over our nation’s citi es has made way for a lot of construction opportunities too. Supervisors and workers who extract old materials before new construction can begin are also benefitting from the construction boom that is making this fall a hot time for the job market.

Personal and professional development Essay Example | Topics and Well Written Essays - 1500 words - 1

Personal and professional development - Essay Example Early warning scoring was immediately undertaken to determine the severity of the condition based on observable symptoms. The patient scored 6 on the EWS and the attending physicians immediately prescribed a salbultamol nebulizer and oxygen therapy. After 15 minutes, based on clinical observation, the patient’s condition improved. His respiratory rate was lowered to 23 and heart rate at 123 bpm. However, his blood pressure dropped further to 95/55mmHg. Despite exhibiting signs of improvement, the patient’s EWS rose to 8 and contravened the clinical observations. The intensive care specialist was immediately called in to intervene. In the case described above, there was a need to develop reflective practice in nursing care delivery especially in emergency cases. Relying on observable symptoms may not be enough to make a correct diagnosis and decision. The intent of this discourse is to demonstrate the effective use of reflective model framework to execute the Greenwood’s Level 2 (2002) framework for reflection. Greenwood’s (2002) framework for reflection is composed of six stages. The first involves a description in detail of the event. The second stage includes how assumptions, beliefs, values and attitudes of an individual are reflected in his/her actions. Stage three is evaluation. The nursing care practitioner evaluates if the measures employed are consistent with nursing care delivery standards. Stage four is analysis of the event. This involves more detailed inquiry on the items evaluated in the previous stage on which aspect of nursing-related theories were relevant in the choice of action taken. Stage five is synthesis. At this stage, the individual already developed his own insights. The nursing practitioner is also able to view the situation at all angles. It is also at this stage that the individual developed alternatives to the actions undertaken previously to improve outcomes. Finally, the nursing

New States in World Politics Essay Example | Topics and Well Written Essays - 750 words

New States in World Politics - Essay Example A new state can be defined as one whose people have acquired through any means,constitutional or war,complete independence in the way they carry their social-political and social economic activities.According to Albert, Brock and Wolff,civilisation has also led to new states being formed,as more nations have demanded self governemnt from their former states. In the wake of the World War II, there were numerous new states which arose. Similarly, after the world war, the struggle for independence in African and Asian countries, led by former World War II veterans who had been taken from European colonies in Africa and Asia, led to numerous new states in African and Asia. While these formations of these states led to the terms new states, these states are now all over fifty years old. Yet, new states seem to continue to blossom every now and then, the most recent example being south Sudan. Formation of new states has continued to reshape world politics in various ways. The major factor affecting the way new states continue to reshape global politics can be seen in the form of the special relationship between a state and a nation. While in common language, the words state and nation are used interchangeably by the lay man, from a political science point of view, it is clear that these two terms are completely different and that they may mean two different things. In a nutshell, state refers to a collection of people who are joined together by a political ideology. These people may not have any social or spiritual connection or oneness. On the other hand, a nation is made of communities who share their spiritual or social values and beliefs (Duncan, Webster & Switky, 2008). Although in many cases the existence of a state coincides with the existence of a nation, it is not always so. In this regard, where there is a discrepancy between the nation and state, the political surrounding that kind of state, both nationally and internationally has a problem. In cases where a state overlaps two or more nations, the state is likely to have internal rows leading to civil wars. The main cause for this is that the nations in the state may not share the same values, and this may lead to the people fighting over values, resources or just general politics. On the other hand, where a nation goes beyond the borders of ne state, the two states containing parts of single nations will most likely to have wars with each other. The formation of new states therefore has a very fundamental role in reshaping international politics (Teller, et al, 1964). A very good example is the demarcation of Sudan to make south Sudan and Sudan states. The issues that had existed for a long time in the former Sudan were the fact that it was one state which contained two nations, on in the northern part of the country and the other in the southern parts of the nation. Once the two states were separated to make two distinct states, the issue of civil war was overcome. However, this di d not guarantee that that the two nations would stop having quarrels. The separation of the two states actually led to some misunderstandings which today are not only affecting the two nations but also international politics (Albert, Brock, and Wolff, 2000). In this regard, t is possible to look at the various ways in which the formation of new nations affects international politics; New alliances With the formation of new states, two things always happen. First, it is good to note that new states are not formed from thin air, rather, they are formed from existing states and the process is always bloody (McCormick, 2011). While in some cases, the formation of new nations can be achieved through strong constitutional rules like was the case for India, the truth is that in over 90% of the new nations are made from bloody processes such as civil wars (in the case for Sudan), or militia wars against existing governments such as the in the struggle for independence in Africa.

Air Pollution Essay Example | Topics and Well Written Essays - 1000 words

Air Pollution - Essay Example This research paper explores that different places in the world have different air quality, depending on the magnitude of air pollution. The air that people inhale is neither clean nor is it healthy. In fact, the air that people breathe contains harmful gases like ground level ozone gas, carbon monoxide, sulfur dioxide, nitrogen oxide, air particles and lead. Of the five gases, ground level ozone and air borne articles have been identified as the greatest risk to human health in the world major cities. There is a great difference in air qualities in the world and this is manifested in different statistical informations in the major cities of the world. The major cities of the globe are impacted by air pollution, which affects air quality. The Air Quality in the world is assessed through Air Quality Index (AQI). AQI is used for reporting air quality on a daily basis. AQI provides information about how clean or polluted the air is in the places that a person resides and what health haz ards a person should be concerned of. Environmental Protection Agency usually calculates the AQI of five major air pollutants, which are controlled by the Clean Air Act. These pollutants include ground level ozone gas, carbon monoxide, sulfur dioxide, nitrogen oxide and air particles. Of the five gases, ground level ozone and air borne articles have been identified as the greatest risk to human health in the world major cities. Most of the sources of air pollution arise from technological and industrial advancement made by humans.

Coil Spring Modification Technical Engineering Essay

Coil Spring Modification Technical Engineering Essay A vehicles appearance can be improved by lowering the car height. This can be achieved by heating or cutting the coil springs. However, this modification can have effects on the vehicle wind resistance, centre of gravity and reduce excessive body role. This modification contributes in fuel efficiency and better handling. It can also have negative impacts and could cause a big damage in the vehicle as well as being unsafe for the passengers if not done properly. Compression springs are the cheapest coil spring to manufacture, they are built to withstand the forces of linear compression or pushing forces that makes them as the most durable type of coil spring available. The coil springs are made of heavy gauge steel wire that is used to support the vehicle. The ends are designed to be flat because of the applied evenly force at each end of the spring, decreases the buckling tendency, or to provide exact seating requirements and solid height reduction which may be compulsory by specific uses (Kiwi Springs limited, 2008). Coil springs usually have three types of ends which are: Tangential end: this type of spring will fall over if someone stands on its end because the end of the coils end remains to twist off in the space Tangential End Coil Spring Square end: the end of this design permits the spring to stand still when placed on the end because the end coil curves back down and touches the coil below it . http://www.budzter.com/images/adjusterPics/DSC00479_Small.jpg Pigtail end: this spring has the sort of square type end and contains a smaller diameter than the coil in the body of the spring http://pitstopusa.com/images/T14599086.jpg (EATON Detroit Springs, 2011) Theory Generally, the end design of the spring can tell straight whether it is safe to cut or not, which concluded that pigtail end and square end coil springs cannot be safely cut. As mentioned briefly above, cutting or heating the coil spring in the vehicle may have some implications in terms of structural integrity, drivability or road worthy aspects. Cutting the coil spring affects the spring rate to increase, stiffen it and making the handling and ride a bit firmer, this is caused by the spring design rule which uses the wire diameter and the number of coil to define the spring rate. The unit for spring rate is pound per inch (lb/in) which means amount of force needed to compress the coil spring by 1 inch. For example when cutting springs by more than 2 inches of the front suspension of the 60s or 70s Chevy without following the specifications, many problems can occur, things such as ground clearance difficulties, positive camber will be gained at an increasing rate as well as suspension traveling may be less effective. It is known that cutting a spring by 1 inch will cause the ride to get lower between 1.5 and 2 inches because of the spring ratio which is 1.5:1 and 2:1 (Smith, 2008) When having too soft spring rate the whole suspension system may be affected because the vehicle will keep on bouncing off the bump stops, while having too much spring rate can create lots of bouncing and cause the tires to lose the grip with the road. Also spring load can affect the suspension system because of the carried weight that a coil spring supports at any moment compressed height. For instance if we use a 10 tall inch spring at free height with 200 lb/in rate, with a compressed height of 6 inches, the support will be around 800 pounds at that height (De Los Santos, 2009) How do we calculate the spring rate? By using the following formula we are able to find out the spring rate of the compressed spring. K = Where k = constant pound of load per inch G = modulus of rigidity of spring material, pound per square inch d = wire diameter, inches n = number of active coils, which is the number of coils subjected to flexure (always less than the total number of coils) D = mean coil diameter, inches = Outer diameter Wire diameter http://www.engineersedge.com/spring2.gif (Engineers Edge, LLC, 2011) Experimental method In this project, the modification will be for lowering the car. Hence we are going to modify the 1995 Impala SS (Appendix 1). This modification will be simply achieved by cutting the springs. This will result in reducing the free length and spring height. Since we do not have access to the real material, this modification will be done in a virtual way by using calculation. Data: number of active coils = 6.5 inches Wire diameter = 0.685 Outside diameter of spring = 5.4375 inches Free length = 16.5 inches Compressed length = 14.05 inches By using the formula above, the conclusion of the spring rate will be 443.76 pounds/ inches (as on the appendix 1). If we want to modify this spring, we will cut one coil that will decrease the number of coils from 6.5 inches to 5.5 inches of active coils, outside diameter and wire diameter will remain the same and free length will change from 16.5 inches to 15.5 inches and compressed length from 14.05 to 13.05 inches. Results: K = = 11,250,000 x 0.6854 / 8 x 5.5 x 4.75253 K = 524.44 pounds/inch The result from the modification shows that the spring rate has been increased by 80.68 pounds/inch. According to Law Volume Vehicle Technical Association (Inc), (2000), states that no modification for changing the height of the vehicle should be done without the spring manufacturer and the heat method should not be used during the modification (Appendix 2). AA New Zealand allows modification of the road springs or shock absorbers if they are fitted as a direct replacement for the originals and should be fitted exactly the same way without raising or lowering the vehicle. Modifying the vehicle without a professional certifier could prevent the vehicle from getting WOF (Appendix 3). Discussion It is essential when modifying the coil spring to consider what reason we are modifying the spring. Other aspects that need to be considered are spring rate, spring index, total share stress and spring axial deflection. The whole suspension system might not perform as it should if proper procedures are not followed. Safety regulations should also be the main priority at all times when dealing with coil spring modification and the suspension system in general. Conclusion According to the results of the experiment in this report, it can be seen that by decreasing the spring height, the spring rate increases. By cutting the spring, we change the appearance of the car to be closer to the ground. It is very important to understand the disadvantages and advantages of what we are trying to achieve. It is also necessary for the driver to understand the change the modification will bring when using the vehicle in different environment. If the user is not able to tell the effects of modification, it is recommended to see a professional. References De Los Santos, H. (2009). Lowering Your Car Properly. Retrieved April 14, 2011 from http://www.carcraft.com/techarticles/lowering_kits/index.html EATON Detroit Springs, (2011). Cutting Coil Springs. Retrieved April 13, 2011 from http://www.eatonsprings.com/cuttingcoilsprings.html Engineers Edge LLC. (2011). Compression Spring K Constant Calculator. Retrieved April 14, 2011 from http://www.engineersedge.com/spring_comp_calc_k.htm Kiwi Springs Limited, (2008). Importers of Metal Springs Allied Products. Retrieved April 12, 2011 from http://www.kiwisprings.co.nz/coil-springs.htm Smith, J. (2008). Chevy High Performance. Retrieved April 14, 2011 from http://www.chevyhiperformance.com/techarticles/89858_chevrolet_lowering/index.html Appendices Appendix 1 The default values are from the front coil springs on a 1995 Impala SS. Number of Active Coils: Wire Diameter: inches millimeters Outside Diameter of Spring: inches millimeters Free Length: inches millimeters Compressed Length: inches millimeters Spring Rate: pounds/inch newtons/meter Pressure at compressed length: pounds newtons FORMULA: spring rate = modulus of spring steel X wire diameter4 8 X number of active coils X mean coil diameter3 modulus of spring steel = 11,250,000 pounds/inch2Â  = 78,500 newtons/millimeter2 http://www.pontiacracing.net/js_coil_spring_rate.htm Appendix 2 Low Volume Vehicle Technical Association (Inc). (2000). Springs 2.3(10) Springs and shock-absorbers fitted to low volume vehicles must be: (a) of a size and rate which is appropriate for the weight and intended use of the vehicle to which they are fitted; and (b) in the case of coil springs, of a sufficient rate so as not to fully compress upon full suspension travel. Heavy-duty and height-changing coil springs 2.3(11) Low volume vehicles fitted with coil springs must: (a) be fitted with shock absorbers which are able to satisfactorily control spring energy; and (b) where a substantial increase in spring rate occurs, be reinforced as necessary in the areas of the body or chassis or sub-frame structure on which the increased loads being transmitted are likely to cause fracturing or failure. 2.3(12) Coil springs fitted to low volume vehicles that reduce the suspension travel and, as a result, the ride height of the vehicle, must be proportionately increased in stiffness rate so as to ensure against contact between the underside of the vehicle and the road surface during normal vehicle operation when fully laden. 2.3(13) Coil springs fitted to low volume vehicles must be designed in such a way that the ends of the springs, whether of a plain, plain and ground, closed, or closed and ground configuration, are shaped to match the surfaces against which they seat, both top and bottom. 2.3(14) Progressive-rate coil springs must have the closely-wound section of the coil positioned either: (a) at the end nearest the body, chassis, or sub-frame structure; or (b) in accordance with the spring or vehicle manufacturers specifications. Coil spring containment 2.3(15) Coil springs fitted to low volume vehicles must be firmly contained within their locating seats in such a way that the springs can not rotate, move vertically, or become dislodged when the suspension travel reaches its maximum rebound, limited by either: (a) a shock absorber of a compatible stroke length; or (b) properly fastened retaining clamps; or (c) properly fastened wire-rope straps of the type used in motor-sport applications, provided that the suspension mounting points are sufficiently strong to withstand the increased loadings imposed by the sttaps reaching the end of their ttavel, particularly in the case of MacPherson-sttut suspension systems. Coil spring modifications 2.3(16) Coil springs fitted to low volume vehicles must not be modified for the purpose of changing the vehicles ride height unless either: (a) the spring is modified by a recognised spring manufacturer, and the configutation of the modified spring ends match the end configuration of the original spring; or (b) the spring: (i) fitted to the vehicle in its original configuration had plain unground ends; and (ii) no heat is used during the modification process. Low Volume Vehicle Technical Association (Inc). (2000). Suspension Systems. LVVTA Low Volume Vehicle Standard 195-00(00).

Environmental Views of Arctic National Wildlife Reserve (ANWR) Essays

Executive Summary The Arctic National Wildlife Reserve (ANWR) is a beautiful 19.6 million acre coastal plain, and is located in the Northeastern part of Alaska. ANWR is home to numerous species of wildlife and one of the largest untapped oil preserves in the United States. There is an immense debate between the opposing environmentalists and the politicians who want to drill for oil on a section of ANWR, which is only 1.8% of the refuge. Environmentalists who oppose drilling for oil in Alaska say the wildlife and the native populations are threatened by drilling for oil in ANWR, even though most of the natives are strongly in favor of drilling. ANWR could save the US from having to import $800 billion worth of foreign oil, creating hundreds to thousands of American jobs, and generate hundreds of billions in royalties and taxes (anwr.com). Three different environmental ethic views will be addressed, Utilitarian, Deontology, and Lockean. The Utilitarian argument is that the greatest function of ANWR will be reached through drilling. It implies that the intrinsic qualities of the land are of lesser value, and that ANWR serves the people better by being given over to the purpose of oil production. Deontology views ANWR rationally. The question is asked: what would a rational person do when developers propose to convert an unspoiled landscape to commercial use? In the Lockean view, man has a right to use property and the various resources of the earth as he wills, to support his life and values. The development of ANWR overshadows the minimal risk of environmentally disrupting the wildlife. The US economy and the citizens of Alaska would benefit from the development, not to mention the wildlife would be monitored and thus receive more attention. Introduction Alaska is surrounded by ocean and mountainous terrain and has one of the most beautiful landscapes in the United States. Alaska is home to the Arctic National Wildlife Reserve, in which hundreds of thousands of wildlife reside alongside with one of the largest oil preserves in the United States. Environmentalists are vexed about the possible disruption in the wildlife’s natural habitat and the effects it may have on the Alaskan Natives. Congress is being faced with the challenge of mergin... ...s.org/releases/pr2005/pr031105.html Rodger Schlickeisen. Fight to Protect the Arctic Refuge Reaches Critical Point Refuge Faces Most Dire Threat in Decades. Retrieved April 10, 2005 from http://www.defenders.org/wildlife/arctic/ardrill.html http://www.defenders.org/wildlife/arctic/news/arcticpoll.pdf Retrieved on April 9, 2005 http://encarta.msn.com/sidebar_1741573203/1987_Alaska.html "Alaska," Microsoft ® Encarta ® Online Encyclopedia 2005 http://encarta.msn.com  © 1997-2005 Microsoft Corporation. All Rights Reserved. http://www.globalethics.org/newsline/members/issue.tmpl?articleid=04210222393811 http://www.google.com/search?hl=en&lr=&oi=defmore&q=define:Property+Rights N.A. Retrieved April 10, 2005 http://www.jdnews.com/SiteProcessor.cfm?Template=/GlobalTemplates/Details.cfm&St oryID=30570&Section=NIE http://www.msnbc.msn.com/id/4542853/ http://www.newsviews.info/environment05a.html http://www.savearcticrefuge.org/learnmore.html Retrieved on April 9, 2005 http://www.washingtonpost.com/wp-dyn/articles/A11332-2004Sep10.html Stephen Segaller. PBS: Extreme Oil (2004). Retrieved April 10, 2005